http://inlislite.bbpkmakassar.or.id/demo/ https://chavancentre.org/slot-demo/ laskar89 laskar89 parisklub parisklub

Sauna Paint Wax - Cedar Effect 0.9L

More Views

Sauna Paint Wax - Cedar Effect 0.9L

Availability: In stock

Sauna Paint Wax Cedar Effect

  • 0.9 Litre
  • 10 - 14m

Oceanic Saunas have teamed up with Teknos to develop a range of exciting wax colours, Satu Saunavaha can be used anywhere on the sauna including the benches, wall panels and ceiling, as well as the outside of the sauna. It can even be used to treat ceiling and wall panels in washrooms after sauna lounges and habitable rooms. 

SATU SAUNAVAHA Sauna wax is a water-borne protection containing natural wax for wooden surfaces in saunas. It forms a dirt and water repellent but breathable waxy coat. 

Cedar effect sauna paint wax can be thinned and applied differently around the sauna, this will create the reddish brown tones of real cedar wood. 

€39.00 Inc VAT
Enquire about this product
Prices guaranteed until end of the month
OR

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Description

SURFACE PREPARATION

Clean new wooden surfaces from dust and dirt. Wash surfaces previously treated with wood wax with RENSA SAUNA sauna cleaner and rinse thoroughly with water. If the wooden surface has previously been varnished, oiled or treated with protection for sauna, the suitability of the product must be ensured by a test application.

APPLICATION

Stir well before use. Tinted product must also be stirred during the application, if needed. Apply SATU SAUNAVAHA by brush or sponge. One application is sufficient for panel surfaces and benches in the steam-room of sauna. Treat ceiling panels in wash rooms and other rooms twice. The intensity of the shade and the absorption of the product to the wooden surface must be ensured with a test application when using tinted product. Absorption properties of the surface and possible previous treatments affect the shade. The product may be thinned with water 5 - 20 % by volume, if the shade seems too intense.

APPLICATION CONDITIONS

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10 °C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

MAINTENANCE

The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

STORAGE

Must be stored tightly closed and kept cool. MUST NOT FREEZE.

TAKING INTO USE

Sauna can be heated after 1 day of the application, but it must be preheated and ventilated once before taking into use. The final forming of the film takes abt. 3 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care.
Technical Data 
Solids abt. 25 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/f): 130 g/l. The product's VOC: max. 130 g/l.
Tinting system Teknomix
Density abt. 1 g/ml
Drying time – dust free after ½ h
Drying time – dry to use the following day
Thinner Water.
Clean up Wash the equipment immediately after use with detergent and warm water.
Packages 0,9 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification
Gloss value 00099
Specification
Quantity 0.9 l
Surface 10 - 14 m2
Delivery & Warranty

Delivery of your order

To know the availability of this product and its delivery times, contact us.

Guarantee

Product not exchangeable or refundable once open.