- Product Description
SURFACE PREPARATIONClean new wooden surfaces from dust and dirt. Wash previously oiled surfaces with RENSA SAUNA sauna cleaner and rinse thoroughly with water. If the wooden surface has previously been varnished or treated with protection for sauna, the surface must be sanded bare.
APPLICATIONBefore use stir the product thoroughly. Apply SATU LAUDESUOJA with brush, sponge or clean cloth. Apply to a clean and dry wooden surface 1 to 3 times depending on the absorption properties of the surface. Wipe off excess oil 30 min after the application.
APPLICATION CONDITIONSThe surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10 °C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
MAINTENANCEThe surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.
STORAGEMust be stored tightly closed and kept cool. MUST NOT FREEZE.
TAKING INTO USESauna must be preheated and ventilated before taking into use.
Solids abt. 100 % by volume Volatile organic compound (VOC) The product is not included in the EU VOC directive. Density abt. 1 g/ml Drying time – dust free after 1 h Drying time – dry to use the following day Clean up Clean the equipment immediately after use with warm water and detergent. Packages 1 L Approvals & certificates M1 classification